Do you want to reduce manufacturing time? Bet on the Novabloc block making machine

Our Novabloc block making machine is a completely automatic installation and is equipped with the modular vibration system, patented by Poyatos. Said modular vibration consists of two unidirectionally synchronized vibrating axes.

The two vibrating shafts simultaneously carry two eccentric masses which, at full load and at non-stop speed, add to each other or compensate each other. Something that manages to vibrate or not, with the engine always running. A plus to reduce manufacturing time in this concrete block machine model.

It should also be noted that the Novabloc model press is equipped with a vibration system with servomotors... A system that is made up of a vibrating table with four eccentric masses. These allow you to control all parameters.

What options are there in these block making machine?

Novabloc can be offered to work with wooden, plastic or metal trays, and with measurements between (1200 - 1400) x (550 - 900) mm and with optional double layer equipment.

In addition, for the transport of trays to the dryers, the Novabloc block making machine can be offered with a multiforca trolley adapted to the characteristics of each project in terms of number of heights, maximum transport load (and the possibility of being mounted on a turntable, etc. )

Regarding the output of the product packages, a wide variety of options is offered (roller track, slat track, pallet truck, etc.) according to the needs of each project.

Characteristics of the Novabloc concrete block machine

• This installation includes an automatic electronic palletizer with a double central column with translation and high-speed up and down movements.
• It also features independent tightening from the 2 directions, with force regulation to apply the appropriate pressure parameters to each part (memorized for each product in the installation program).
• Lastly, it has specific software with an easy-to-use touch screen that provides all kinds of information on production, consumption, maintenance, etc. and allows a tele-assistance service with remote access.

Main advantages of Novabloc block making machines

The Novabloc concrete block machine stands out for presenting the following advantages for factories:

• Energy saving on starts and stops.
• Time saving in starts and stops (about two seconds per cycle).>
• That there is no disintegration of material, as the vibration stop is instantaneous.
• Savings in maintenance in all vibration mechanisms.
• The drive is achieved with a single 22 kW motor at 1,500 r.p.m. (normal series engine), without any type of maintenance.
• Automatic regulation of vibration parameters, both amplitude and frequency.

Specific software with touch screen

But, in addition, this model of concrete block machines has a specific software with an easy-to-use touch screen that provides all kinds of information on production, consumption, maintenance, etc. and allows a tele-assistance service with remote access.

In short, we are talking about a block making machine that presents a modular vibration as a very reliable and experienced system... At the same time as fast and productive and with minimal requirements in terms of its operation and maintenance.