Do you want to know more about concrete block machines in Spain?

Poyatos, manufacturer of Concrete Block machines for the production of precast concrete elements, is a specialist in integral solutions for the installation of block manufacturing plants. It offers a wide range of block machines in Spain.

Block machines are used to make concrete blocks of various shapes for construction. They generally consist of a feeding system, a vertical hopper, a filling system, a mobile mold and a demoulding system. The materials that are introduced into the mold are generally cement, sand and aggregates, but they can also be products such as gravel, bituminous materials, lime and fibers.

Next, the concrete block machines are stamped and demolded using a pallet system and a crane. After manufacturing, the blocks are transported to a curing, painting and drying facility before being stored. These machines can produce blocks ranging from 20x20 cm to 150x250 cm.

Are you looking for concrete block machines in Spain?

At Poyatos we are a specialist in comprehensive solutions for the installation of block manufacturing plants. Manufacturers in the European Community must follow the CE manufacturing requirements and regulations. This fact allows us to offer greater guarantees to our clients.

We have a large stock of spare parts manufactured by POYATOS in our factory for all machines, as well as large stocks of spare parts in many countries to expedite deliveries. In this way, if you buy block machines in Spain in our organisation we will accompany you throughout the entire life of the machinery...

Maintenance of the concrete block making machines

Concrete block machines require a certain level of care and maintenance to function properly and extend their life. Here are some tips for caring for your machines:

• Check and clean seals and moving parts to prevent disconnection or premature wear of parts.
• Use special lubricants for bearings and other components that require lubrication.
• Use manufacturer-recommended tools and replacement parts for checking, disassembling, and reassembling parts.
• Regularly check the power supply system and make sure all connections are tight and installed correctly.
• Test the hydraulic pressure system and lubricate the equipment periodically to prevent leaks.
• Check that the lubrication level and hydraulic oil flow are correct.
• Make sure the gear and drive shafts are properly aligned.
• Finally, inspect the mold and inserts for any excessive wear or damaged parts.

By following these tips, your concrete block machine will run more efficiently for a longer period of time.