Concrete batching plants 22 diciembre, 2023

Do you want to know some tips for working in a Concrete Plant?

Working in a Concrete Plant is not an easy task, and for the average homeowner, concrete can seem like an inaccessible construction material. Although, pouring the wet concrete mixture into a mold and letting it harden makes it seem like working with concrete is a piece of cake. While that sums up the fundamentals, many other factors can compromise the final result.

It is important to improve the durability and aesthetic appeal of your concrete projects by learning some simple techniques... So let"s give some tips for working in a concrete plant.

Working in a Concrete Plant

1. Take precautions around the concrete plant:

We must take the correct posture, such as raising our legs instead of our back to avoid injuries. If you can, bend your knees and place the heavy object in the space between them while keeping your back straight.

It is possible to get chemical burns from concrete. Therefore, when working with concrete, always dress appropriately. Take precautions and wear long sleeves, waterproof gloves and pants. Wear sturdy rubber boots when standing on concrete.

2. How to determine the best concrete mix for your task?

Any of these concrete mixes may be necessary depending on the type of work defined and factors, including strength, rate and slab thickness:

a) Quick-setting concrete mix for general use:

Ideal for use in various contexts. If you use this mix at a thickness of 2 inches or more, it will set in 30 minutes and be ready to walk in 6 hours.

b) A Strong Concrete Mixture for Any Use:

The 4000 psi strength of the high strength mix is identical to that of the quick set mix. The same applies to slabs 2 inches thick or more. However, you should wait a full day before stepping on it. However, this slower setting mixture is much more cost effective than its quick setting equivalent.

c) Mixture for concrete surfaces:

You"ll need a specially formulated concrete mix with plasticizers and flow enhancers to create concrete countertops, tables, vanities, and sinks. Pre-mixed additives are included in the countertop concrete mix, and it"s more critical strength requirements make it suitable for use in countertops.

3. Get a perfect shape for your project in your concrete plant

All concrete projects, interior or exterior, require a form. The concrete must be poured into a form, which is a mold. It modifies the edges of the concrete but not its top and bottom surfaces.

Build the concrete form using discarded two-by-fours, two-by-sixes, or boards with a width equal to the thickness of the slab.

4. Get the right amount of water to add to concrete:

The recommended amount of water to add to each bag of ready-mix concrete is printed on each bag. Typically, you will need 2-1/2 to 3 quarts of water for every 50 pounds of quick-setting concrete mix.

Add 2 to 2 and a half quarts of water per 50 pounds of high-strength concrete mix. One quart of water should be for every 20 pounds of concrete countertop mix. The recommended amount of water to add to each concrete mix is usually printed on the box.

Adding the proper amount of water to the concrete mix can also be done visually and by touch. The consistency of well-mixed concrete is often compared to that of cookie dough.

When applied with a trowel, it clumps and stays on the trowel for a few seconds, especially if the spoon is held at an angle. A dry mix will not clump together the same way a wet one would. A mixture that is too wet will not stick.

5. Other tips for working in a Concrete Plant

a) Add a mixture to:

Use the concrete mix directly from the bag without additional mixing or measuring. It"s made for the average user, so it"s sure to please. However, concrete mixes provide additional leeway within the established limits of the material.

Admixtures are usually added to concrete in the mixing stage. Additives are added to a material to alter its properties, such as set time, flow, strength, and resistance to freeze-thaw cycles.

b) Concrete with a touch of color:

Cured concrete can be stained to add color and character to a dull gray substance. Instead, incorporate a liquid colorant into the concrete mix before pouring if you want colored concrete.

Color options for liquid concrete are restricted to earth tones such as reds, browns and blacks. To stain concrete, liquid dye is poured into a bucket of water and mixed well before being added to the dry ingredients.

Working in a Concrete Plant

Conclusions on tips for working in a Concrete Plant

The five main components of a Concrete batching Plants are a storage area, a control system, scales, a conveying system and the mixing equipment itself.

Concrete is the main raw material used in construction as it combines aggregates (rocks and stones), sand, cement, water and coal ash with other additions. The difficulty of the actual plant configuration.

 

Poyatos in the world

Since 1975, around the world, in more than 80 countries, we have exported and assembled turnkey factories.

Find us

Contact Us

Poyatos Export S.A.

In POYATOS we offer integral solutions for all types of blocks and concrete products factories.

Get in touch
+34 958 46 69 90
Emailpoyatos@poyatos.com
Polígono Industrial Juncaril. Calle Loja 119, 18220 Albolote.
direcciónGet Direction
This site uses cookies to improve the experience on this website. You can configure your browser to reject these cookies. You can consult our Policy of Privacy Policy & Cookies.Acepto