Are you looking for machinery for special finishes of concrete blocks?

Then in Poyatos you will find the best solutions. And it is that our range of machinery for special finishes of concrete blocks is the most extensive.

In this way, we have a wide range of machines for the treatment of precast surfaces and for the special finishing of concrete blocks. Among which we highlight: splitting machines, aging machines for finishing pavers, shot blasting and bush hammering machines, color dosing systems, ColorMix systems for the color gradient effect, etc.

Splitters for concrete blocks

The splitters are used to cut concrete blocks, and those of Poyatos are semi-automatic and come equipped with 4 blades, one inside, another on the top and two on the sides.

We have two different models:

Model E.600

It comes equipped with 4 blades (inside, top and side) and has the following features:

1. Semi-automatic operation.
2. Equipped with blades and support for blocks from 40 to 270 mm high (optional up to 420 mm).
3. 600 mm long blades (optional up to 800 mm).
4. Hydraulic group motor power: 7.5 CV.
5. Hydraulic pressure: 115 Kg/cm2.
6. Cutting force: 17,500 Kg.

Model A-600/4

It has mechanically and hydraulically compensated efforts and is also equipped with 4 blades (inside, top and sides). In addition to:

• Cutting length: 610mm.
• Cutting height: from 40 to 270 mm (optional up to 370 mm).
• Hydraulic pressure: 115 Kg/cm2.
• Cutting force: 20,000 Kg.
• Production: 24 blocks per minute (12 cuts / minute) or 36 blocks per minute (18 cuts / minute).

Machinery for special finishes in concrete blocks: aging systems

Our aging system for concrete blocks, or aging machine, bush hammer, presents an aging procedure by hammering. And it offers a special finish to your blocks. It is equipped with 144 hardened steel hammers and is patented by Poyatos.

It also works for both blocks and pavers, and has a power of 6kW, as well as a cabin to dampen noise. It is also equipped with a dust suction chamber and can optionally bring 144 bush hammer plates.

Systems for inserting polystyrene sheets

Another of our machinery for special finishes of concrete blocks are the systems for inserting polystyrene sheets. With them you can get the best finishes for your concrete blocks.

It is a machinery for inserting polystyrene injection sheets that will offer ideal finishes and enhance its strength.

Machinery for special finishes in concrete blocks: color dosage

With our color dosing systems, you will be able to offer better finishes to your blocks and pavers. Choose the color you want and get an ideal look…